SMALLFATW Aluminum Front Inner Fender Liner for 2007-2018 Jeep Wrangler JK & JKU - Perfect Fit & Easy Installation (Black, 2-Piece Set) | Durable Off-Road Protection & Enhanced Vehicle Appearance

You need to drill the upper two holes on a wrangler which the instructions never tell you and you have to use rivet nuts on the top two and meed a separate tool for that.Remember to keep or original hardware. It’ll make it easier to install.They fit good I like them. But the straps do come loose. And it dose effect the seat beltCame a day early which was cool. I immediately put the pieces together. It’s very easy. Use the small screws to put the three pieces together for each side. Holes all line up as long as you don’t tighten each screw and nut immediately. Then you can put the rubber trim on.Placing the liners in was quite easy. The driver side was a super great fit. Take the 4 longer screws to fasten the liner to the wheel well. Use a small wrench with tape to secure the nut from behind the wheel well and then tighten the screw in with the Allen key from the front. It’s just the two screws and nuts on the bottom two holes of each liner and wheel well.The top piece fits in and is held in by the lip of the wheel well (very snug). Can’t even pull it out after install is complete. The passenger side was the same but I had to really push the liner in and up into the wheel well with my body weight. (I’m 6’2 195lbs)Don’t worry about the nut-sert and drilling unless you really enjoy extra work. Not worth it in my opinion. I would have done it if needed but I tried the simple way first and it’s very durable and flush.I love the look of the liners. They are strong and decently thick. The flags look awesome and they are meant to be mirrored. American military uniforms feature the U.S. flag, which is worn facing backward. The rule is that the blue field of stars should always be in the highest position of honor on the uniform. That position has always been the right shoulder with the flag's blue stars facing forward....So don’t order this and give it a bad review because you wanted two flags with the stars in the upper left corner.can’t get anything better for the priceDefinitely worth the moneyGreat looking product, but the hardware included was stripped out when I got it. Fortunately I was able to make some that I had around work, and they look great installed.Rear inner fender -2015 JKU. Came with paper instructions that were not much help. Need to add something to identify the part. I can see where this would be easy to assemble it incorrectly and having to piece the puzzle pieces together several times. Also, the holes are extremely difficult to align. Description fails to specify that a nutset tool is needed. Two holes are supposed to line up, they don’t. The other two bolts to secure to the Jeep need to be drilled and the nutset tool is needed to install the nut. Otherwise the inner fender is secured with only two bolts. I consider myself to be quite mechanically inclined and these things are a sumbeech to install.